Toyota HiAce Gullwing Window

🔴 BACK ORDER – Estimated dispatch: 6–8 weeks

Upgrade your Toyota HiAce with the Mission 4x4 Gullwing Window, specifically designed to replace the factory rear side glass while maintaining a clean, flush fit with the vehicle body.

Manufactured from a combination of 3 mm and 2 mm aluminium, the multi-panel construction provides excellent strength while giving the HiAce a tough, rugged, military-inspired appearance.

The window features a clamp-style mounting system, allowing installation without drilling into the vehicle body. Once installed, the gullwing sits flush with the exterior of the HiAce, allowing the sliding door to operate without interfering with the window when closed.

Key Features

• Specifically designed for Toyota HiAce vans

• Available in Driver Rear (RH) and Passenger Rear (LH)

• Combination of 3 mm and 2 mm aluminium construction

• Multi-panel design for added strength and a rugged, military-inspired appearance

• Textured black powder-coated finish

• Heavy-duty pinchweld rubber seal around the complete window

• Clamp-style mounting system – no drilling required

• Lockable compression latches for a secure, weather-resistant seal

• 2× heavy-duty gas struts

• Gullwing opening provides convenient external access to the rear cargo area

• Sits flush with the vehicle body when closed

• Designed to allow the HiAce sliding door to operate without interference

• Designed and manufactured by Mission 4x4

The Mission 4x4 Toyota HiAce Gullwing Window is ideal for touring, camping, trade and custom van builds, providing quick access to your storage area while giving the vehicle a clean, strong and purpose-built appearance.

PLEASE NOTE

The photos shown have been supplied by one of our customers and are provided for reference only. Any timber framing, internal trim, cabinetry, lining or other materials shown inside the vehicle are not included with the Mission 4x4 Gullwing Window. These items were installed separately by the customer.

The product supplied includes the gullwing window assembly and supplied mounting/clamping hardware only.

Conquer ruts and roThe Mission 4×4 Maxtrax Table is the latest design to accommodate Maxtrax Extreme and MK2 recovery boards.
Made and manufactured locally in Western Australia, these recovery track holders are truly in a league of their own. But it does not only serve as a holder for recovery tracks. It doubles as a vehicle side table as well.

• 2 x 316 grade stainless steel brackets bolted and plated through vehicle side.

• 316 grade stainless steel lockable clamp system for holding the maxtrax.

• Lockable compression locks to hold the table to the car when not in table mode.

• 316 grade stainless steel hinges with multiple holes to allow adjustment for carrying 2 or 4 Maxtrax.

• Tapered front edge allowing less air resistance and wind noise.

• 316 grade Stainless steel cables.

• Currently available for Landcruiser 78 & 75 series (Troop carrier) only.

• Proudly made in Australia by Mission 4×4

*All products are made to order and require assembly and packaging. Products will ship 10 days after payment is received.cks with our high-clearance A-arm engineered for uncompromising ground clearance.

Mission 4x4 Multifunction Table

🔴 BACK ORDER – ESTIMATED LEAD TIME: 4–6 WEEKS

Designed and manufactured by Mission 4x4 for the Toyota Land Cruiser 75 & 78 Series Troopy / Troop Carrier, the Multifunction Table is a compact, heavy-duty side table designed to maximise functionality without taking up unnecessary space.

Shorter than our Maxtrax Table, it combines a generous work surface, integrated pull-out drawer, collapsible basin and fold-away drying rack into one compact system.

The integrated drawer is specifically designed around the supplied collapsible basin. The basin can remain permanently stored inside the drawer when travelling, with the close-fitting design helping minimise movement and rattling when the drawer is closed.

The drawer operates on stainless steel external-use drawer slides and features an easy-access pull handle.

Multifunction Drying Rack

Underneath the main table is our Mission 4x4 fold-away multifunction drying rack. After washing plates, cups or utensils in the basin, simply lower the rack and use it as a drying area.

When not required, the rack folds neatly back against the table for a clean and compact setup.

The perforated panel also gives the table its distinctive Mission 4x4 rugged, military-inspired appearance while providing genuine functionality.

Features

• Suitable for Toyota Land Cruiser 75 & 78 Series Troopy / Troop Carrier

• Compact design – shorter than our Maxtrax Table

• Integrated pull-out drawer

• Collapsible basin included

• Drawer designed around the basin to help minimise movement and rattling

• Stainless steel external-use drawer slides

• Fold-away multifunction drying rack

• Lockable compression latches

• 316-grade stainless steel mounting brackets

• Heavy-duty stainless steel hinges

• Constructed from a combination of 3 mm and 4 mm aluminium

• Can be fitted to either the driver or passenger side

• Designed and manufactured by Mission 4x4

• Made in Australia

Colour Options

Available in:

Midnight Blue | Sandy Taupe | Toyota White 058 | Textured Black

Custom colour coding is also available.

The Sandy Taupe table shown in the product photos has been custom colour-coded to match the vehicle.

Please note: This product is currently available on back order. Estimated manufacturing and dispatch lead time is 4–6 weeks from order confirmation.

The Mission 4x4 LandCruiser Barn Door Rack

is designed for 75, 76 and 78 Series LandCruisers fitted with a rear wheel carrier.

Made from strong, lightweight 3 mm aluminium, it bolts directly to the original spare wheel mounting points on the right-hand barn door — no drilling required.

At only 9.2 kg, the rack is significantly lighter than the spare wheel originally carried on this mounting location, while providing a recommended carrying capacity of up to 25 kg.

The 710 × 410 mm tray features MOLLE-style tie-down points, ideal for securing camping gear, storage boxes, BBQ equipment and other touring essentials.

Features:

• 3 mm aluminium construction

• Rack weight: 9.2 kg

• Load capacity: up to 25 kg

• Tray size: 710 × 410 mm

• Uses factory spare wheel mounting points

• No drilling required

• All mounting bolts supplied

Designed and Made in Western Australia.

Protect your INEOS Grenadier while adding a tough, purposeful finish with the Mission 4x4 Guard/ fender Protection Plates.

Designed and manufactured in Western Australia, our guard protection plates are made from 3 mm aluminium checker plate and precision Designed and manufactured in Western Australia, our guard protection plates are made from heavy-duty 3 mm aluminium checker plate and precision shaped to follow the contours of the INEOS Grenadier front guards.

Designed for touring, camping and off-road use, the plates provide an additional protective layer over the factory guards, helping protect high-contact areas from scratches, branches, stones, equipment and everyday wear.

Key Features

• Designed specifically for the INEOS Grenadier

• Designed and manufactured in Western Australia

• Heavy-duty 3 mm aluminium checker plate

• Supplied as a pair – left and right side

• Precision shaped to follow the factory guard profile

• Helps protect the guards from scratches, scuffs and off-road wear

• Secure riveted installation

• Lightweight and corrosion resistant

• Checker plate surface provides additional grip

• Ideal for touring, camping and off-road setups

• Tough, functional appearance that complements the Grenadier

What's Included

1 × Left-Hand Guard Tread Plate
1 × Right-Hand Guard Tread Plate

The advertised price is for one complete pair.

Installation

The Mission 4x4 Aluminium Guard Tread Plates are positioned directly over the factory guards and securely riveted into place, providing a strong and permanent installation suitable for demanding touring and off-road conditions.

A practical upgrade that adds protection where it's needed while maintaining the rugged character of your INEOS Grenadier.

Mission 4x4 — Designed and Made in Western Australia.

Mission 4x4 INEOS Grenadier Trialmaster Gullwing Window

Upgrade your INEOS Grenadier Trialmaster with the Mission 4x4 Gullwing Window, designed and manufactured in Western Australia using high-quality aluminium and premium components.

Designed specifically for the INEOS Grenadier Trialmaster, this Gullwing Window replaces the original factory side glass and provides quick and convenient external access to the inside of your vehicle.

Perfect for touring, camping and overland setups, it allows easy access to camping gear, storage systems, electrical equipment and other frequently used items without needing to open the vehicle doors.

Key Features

• Designed specifically for the INEOS Grenadier Trialmaster

• Designed and manufactured in Western Australia

• High-quality aluminium construction

• Sealed against dust and water

• Replaces the original factory side glass

• No removal or modification of the interior trims required

• Convenient external access to the vehicle's storage area

• Ideal for touring, camping and overland setups

• Available for left-hand and right-hand sides

Two Installation Options

Bolt-In Installation
The Gullwing Window can be mechanically secured to the vehicle using the supplied bolts and rivnuts for a strong and secure installation.

Smooth Bonded Installation
For a clean, factory-style finish with no visible external fasteners, the Gullwing Window can be bonded directly into the original glass opening using a professional automotive-grade windscreen polyurethane adhesive.

The original factory glass is removed and the Mission 4x4 Gullwing Window fits directly into the existing opening, with no need to remove or modify the interior trims.

A practical, secure and clean access solution designed to make your INEOS Grenadier Trialmaster even more functional for touring and camping.

Turn the factory vent location on your Toyota LandCruiser Troopy into a practical, secure utility access point.

The Mission 4x4 Utility Access Hatch is manufactured from lightweight 2mm aluminium and replaces the factory vent panel, giving you easy access to water, electrical and other utility connections.

Perfect for installing water connections, Anderson plugs, electrical outlets and other accessories, while keeping everything protected, sealed and easily accessible.

Features

• Lightweight 2mm aluminium construction

• Replaces the original factory vent panel

• Uses the existing factory vent location

• No additional holes required in the vehicle body

• Factory vent mounting holes are enlarged to suit the supplied rivnuts

• Integrated push-to-close latch

• Tested in off-road and corrugated-road conditions

• 3 utility connection holes provided inside the hatch

• Additional holes can be added to suit your setup

• Available for driver or passenger side

• Clean, secure and easily accessible installation

• Designed and made by Mission 4x4 in Australia

Warranty

15-Year Warranty – Aluminium structure
2-Year Warranty – Moving components

Money-Back Guarantee

Not satisfied with your Mission 4x4 Utility Access Hatch? We offer a money-back guarantee for added peace of mind.

Designed for adventure. Built for Australian conditions.

Maximise your rear door storage with the Mission 4x4 Rear Barn Door MOLLE Panels, designed for Toyota LandCruiser 75, 76 and 78 Series.

Manufactured from 3 mm aluminium with a black textured powder-coated finish. The MOLLE design provides an easy-access mounting solution for pouches, small tools, torches, first-aid gear and lightweight camping accessories.

The panels also provide an additional physical barrier over the rear barn door windows.

Features

• 3 mm aluminium

• Supplied as a pair

• Black textured powder coat

• MOLLE-compatible design

• Rivets and fitting hardware included

• Drilling required for installation

• Australian designed and made

• Box dimensions: 800 × 600 × 100 mm

• Box weight: 4.5 kg

Choose Vehicle: Select your LandCruiser model from the vehicle options before adding to cart.

Mission 4x4 Internal Aluminium Storage Panels are designed specifically for the Toyota LandCruiser 78 Series Troop Carrier, replacing the factory interior trim panels on both the left and right sides of the rear cargo area.

The system is designed to utilise the otherwise wasted cavity space inside the Troopy, creating practical internal storage while also providing dedicated space for electrical, air and water system components.

Manufactured locally in Western Australia, the system is constructed from a combination of 3 mm and 2 mm aluminium. Components are precision laser cut using modern CNC laser-cutting equipment and riveted together to create a strong yet lightweight modular system.

The panels are particularly useful for touring and custom electrical installations. The internal cavities can be used to house equipment such as inverters, electrical components, water pumps and other touring accessories. An ARB Twin Compressor mounting bracket is included with the panel system.

Purpose-designed cut-outs underneath and along the sides of the storage boxes provide access for routing electrical wiring, plumbing and other services through the vehicle.

The complete system comes in four sections — two sections for each side of the Troopy — making installation and access easier.

Features include: 3 mm and 2 mm aluminium construction; four-piece modular design; left and right side coverage; integrated internal storage; cable and plumbing access cut-outs; ARB Twin Compressor mounting bracket included; fitting hardware included; lightweight construction; black textured powder-coated finish; locally manufactured in Western Australia.

IMPORTANT – INSTALLATION & VEHICLE MODIFICATION

Please read before purchasing.

Installation of this internal panel system requires modification to the vehicle on the left-hand side.

The factory jack must be removed from its original location, and the associated bracket requires modification/bending inward towards the vehicle cavity to provide clearance for the internal panel system.

A factory crossbar located towards the rear of the left-hand cavity also requires removal for installation.

The Mission 4x4 panel system is designed to form a rigid structure once correctly installed. Because removal of an original vehicle brace is involved, Mission 4x4 recommends confirming any structural or engineering implications applicable to your particular vehicle and jurisdiction before installation.

All required panel fitting hardware is supplied.

Designed and manufactured in Western Australia by Mission 4x4.